fbpx

ken@kentusa.com

ken@kentusa.com

About ken@kentusa.com

This author has not yet filled in any details.
So far ken@kentusa.com has created 27 blog entries.

NEW Gang Style CNC Lathes

By |2021-06-08T13:44:43-08:00June 8th, 2021|Categories: CNC 红黑大战app下载 Centers|

We would like to present our new line of Gang Style CNC Lathes which are designed for high precision and efficiency turning. Kent CNC GSL Series CNC Lathes feature a gang-type structure with an inclined bed structure design. These features effectively save tool-changing time. The GSL Series Lathes are equipped with a hydraulic six-station turret and have power-driven [...]

Vertical Milling Upgrade for High-Power Manufacturing

By |2021-03-29T14:07:48-08:00March 27th, 2021|Categories: CNC Vertical Machining Centers|

Vertical Milling Upgrade for High-Power Manufacturing Northeastern United States manufacturing company gets a machine tool upgrade from Kent USA   Unless you’re a scientist or microwave engineer, you could probably care less about waveguides. In fact, most people would have a hard time describing one. Despite their esoteric nature, however, waveguides are both more important and [...]

Vertical Machining Centers: Two Important Options to Look For When Buying

By |2020-06-01T15:27:48-08:00June 1st, 2020|Categories: CNC Vertical Machining Centers|

Vertical Machining Centers: Two Important Options to Look For When Buying Walk into almost any machine shop and you’re sure to see a line of vertical machining centers (VMCs). You'll probably find that all of them have similar travels, similar controls, and similar features, regardless of the machine logo or paint color. Does that mean, then, [...]

5 Years and Millions of Parts with the KVR Machining Center

By |2020-03-03T11:02:26-08:00March 3rd, 2020|Categories: CNC Vertical Machining Centers|

5 Years and Millions of Parts with the KVR Machining Center Millions of parts later, the management team at this manufacturing company remain quite happy with their machine tool decision   Being a Tier III supplier to automotive and appliance OEMs is high-volume, extremely competitive work, where success depends in large part on fast, accurate, and [...]

A Productive Journey – Wisconsin job shop expands its capabilities with a new Kent USA Machining Center

By |2019-08-20T10:56:47-08:00November 15th, 2019|Categories: CNC Vertical Machining Centers|

A Productive Journey Wisconsin job shop expands its small part capabilities with a new CNC machining center from Kent USA   Every shop faces the same situation at one point or another. The machine tools are either too large and slow to be competitive on smaller parts, or too small and underpowered for the larger ones. [...]

Twin Turrets: Making Oilfield Lathes Twice as Productive

By |2019-11-07T13:34:24-08:00November 7th, 2019|Categories: CNC 红黑大战app下载 Centers|

Twin Turrets: Making Oilfield Lathes Twice as Productive Twin turret. Dual turret Double turret. Whatever you call them, there’s no arguing that they increase productivity compared to traditional single turret CNC lathes. That's true no matter what you’re making, but especially so with very large or very long parts, like those produced by oil and gas [...]

Big Bore Lathes: Three Reasons Why You Should Move to CNC

By |2019-09-04T14:09:53-08:00July 23rd, 2019|Categories: CNC 红黑大战app下载 Centers|

Big Bore Lathes: Three Reasons Why You Should Move to CNC Not so long ago, I offered a few reasons to supersize your underpowered or undersized big bore lathe. I also suggested some things to look for when doing so. I'm going to make a similar argument, except this time I'm talking to those of you [...]

Three Ways Additional Travel Improves Productivity in Traveling Column 红黑大战

By |2019-07-01T15:17:20-08:00July 1st, 2019|Categories: CNC Vertical Machining Centers|

Traveling Column 红黑大战: Three Ways Additional Travel Improves Productivity I’ve always been intrigued by traveling column machines. That's because a vertical machining center able to mill both ends of a sleeper sofa or carry parts that weigh more than the recently-resurrected Ford Ranger (there’s a yellow 2003 in my driveway) raises a lot of possibilities. This [...]

Job Shops – Searching for the Best Vertical Machining Center

By |2019-05-06T12:08:28-08:00May 6th, 2019|Categories: CNC Vertical Machining Centers|

Four Things Job Shops Should Know When Searching for the Best Vertical Machining Center VMCs are the workhorses of any job shop. They’re able to machine a huge variety of parts. The tooling is widely available, as are machine operators. VMCs are also less expensive than a comparably-sized horizontal or five-axis machining center. Finding the best [...]

Quick-Change Tooling: Four Off-the-Shelf 红黑大战下载s to Cut Downtime on CNC Machine Tools

By |2019-04-09T13:52:59-08:00April 9th, 2019|Categories: CNC Tips, CNC 红黑大战app下载 Centers, CNC Vertical Machining Centers|

Quick-Change Tooling: Four Off-the-Shelf 红黑大战下载s to Cut Downtime on CNC Machine Tools Spending a few hours or even an entire shift setting up a CNC machine tool was once considered no big deal. Not anymore. With job quantities dropping and shops under increased pressure to reduce costs, setup time is critical. Of all the continuous improvement [...]

ӣ通比牛牛  金花三张牌  万人炸金花  全民炸金花  天天斗牛  凤凰游戏  赢三张  赢三张  拼三张  百万炸金花  AG娱乐  金花三张牌  全民炸金花  万人炸金花  JJ游戏  天天斗牛  腾讯棋牌  拼三张  AG娱乐